The way in which you connect your speakers to a computer depends on the type of computer you are using, and on your operating system.
- Bose Companion 3 Software
- Bose Companion 5 Mac Software Download
- Bose Companion 5 Drivers Download
- Bose Companion 5 Software Mac
Upgrade your sound and your experience with Bose Companion 2 Series III speakers High quality audio performance, with clear sound at any volume Play an additional device just connect to the auxiliary input Volume control/headphone jack on front of right speaker Operating compatibility: Mac, Windows XP.
IMPORTANT: Do not unplug any cables during this setup procedure.
- After plugging in the USB cable, wait for a series of 'Found New Hardware' messages to appear on your computer screen (this takes about 30 seconds)
Note: If you do not see these messages, the capability to display them may be disabled on computer. Wait two minutes before proceeding to the next step. - In the Windows XP Control Panel, open 'Sounds and Audio Devices Properties'
- Under the 'Volume' tab, verify that 'Bose USB Audio' is the connected USB device
- Under 'Speaker settings,' click the 'Advanced' button to open 'Advanced Audio Properties'
- In the 'Speaker setup' drop list, select '5.1 surround sound speakers'
- Click 'Apply' and then 'OK.' Your Companion 5 multimedia speaker system is now ready to use
- T-Power for Charger Supply FOR Bose Companion 2 Series II PC speakers Spare AC Adapter Power Plug Cord /// NOTE: Not compatible with JOD-48U-08A JBL Adapter having AC output /// 3.9 out of 5.
- Dec 23, 2010 Hello, I have a Bose Companion 5 speaker system. It sounds good so far. But there is a note at the systems preferences: no output control is available for this device. So I am not able to control the balance. Thank you in advance!
Note: If you remove the USB connection to your Companion 5 system and plug it in again later, perform this procedure again to check the settings.
IMPORTANT: Do not unplug any cables during this setup procedure.
- Plug in the USB cable. Wait for the device driver installation message to appear on your computer screen
Note: If you do not see these messages, the capability to display them may be disabled on computer. Wait two minutes before proceeding to the next step. - Click on the message to display the installation status. Wait for the installation to finish
- Open the control panel and click 'Hardware and Sound'
- Click 'Sound' in the 'Hardware and Sound' control panel
- Verify that the Playback default setting (indicated by a green check) is 'Bose USB Audio.' If not Select 'Bose USB Audio' and click 'Set Default'
Your Companion 5 multimedia speaker system is now ready to use.
IMPORTANT: Do not unplug any cables during this setup procedure.
Bose Companion 3 Software
- In the 'System Preferences,' open the 'Sound' control panel
- Choose 'Bose USB Audio' for sound output and close the control panel
- In the Applications folder on your hard drive, open the Utilities folder
- Open the 'Audio MIDI Setup' control panel
- Select 'Bose USB Audio' for 'Properties For,' 'Default Output' and 'System Output'
Your Companion 5 multimedia speaker system is now ready to use.
Applies to:
- VideoWave® entertainment system
- VideoWave® II entertainment system
more...
Why update your system?
Your system's remote control operates the system and connected devices like your TV, cable/satellite box and Blu-ray player. Periodic updates keep your remote compatible with devices released after your system's date of manufacture. For more information, see our update details.
In addition, you may need to update your system for SoundTouch™.
- 300 MHz processor (1 GHz for Vista) 32 or 64 bit
- 128 MB RAM (Windows XP); 512 MB RAM (Vista Home Basic); 1 GB (other Vista editions)
- Internet connection
- 125 MB available hard disk space
- USB 1.1 or 2.0 port
- OS v10.5 and v10.6
- Intel-based processor
- 512 MB RAM (10.5), 1 GB (10.6)
- Internet connection
- 125 MB available hard disk space
- USB 2.0 port
Before downloading
Note: If you are updating your system for SoundTouch™ and have completed Steps 1 and 2 in Unify, click Continue to system updates.
Step 1:
Plug the USB drive included with your system into the system's console (see illustration). Then, press the Setup button on the console, select 'Update' and follow the instructions on the screen.
USB drive being plugged into a Lifestyle system
Step 2:
Now, plug the USB drive into a USB port on your computer before running the application (see illustration). Do not disconnect the USB drive while the update application is running. Doing so will cancel your upgrade.
Start downloading the software update
- In the File Download window, click Run or Save
- If Run, follow the prompts to perform the update
- If Save, select a location for saving the file (Bose_System_Updater.exe). Then start the application from your hard drive and follow the prompts to perform the update
Bose Companion 5 Mac Software Download
- Wait for your computer to download the file. It will appear on your desktop as a hard drive icon
- A window should open. Drag the updater file to the desktop as indicated. (If the window doesn't open, double-click the icon.)
- Run the system updater from your desktop and follow the prompts to perform the update
Use the following information to help resolve the problem.
- Make sure your Internet connection is working properly
- Ensure that your system has written system information to the USB flash drive
- Be sure your system is plugged in and powered on
- If you are updating a Lifestyle® system, be sure your TV is powered on and set to the input for your Lifestyle® system
- Press the Setup button on the system's console
- Using your system remote control, select Update in the on-screen menu
- Insert the USB flash drive into the USB jack on the front of your console and follow the onscreen instructions
- Wait until your system instructs you to remove the USB drive
- Remove the USB drive from your system and insert it into an available USB jack on your computer
- The update process will read system information stored on the USB flash drive and determine if updates are available for your system
- If updates are available, the process will write them to the USB flash drive
- If the USB drive is not connected to your computer, or cannot be located, the update process will not complete
Bose Companion 5 Drivers Download
Tip: Connect the USB drive directly to an unused USB jack on your computer.
Connecting to a USB hub can make it more difficult for the update process to locate the USB drive
Connecting directly to an unused USB jack on your computer will make it easier to locate the drive
Help menu
The Help menu is available throughout the update process. From the Help menu, you can access:
- License agreement: Review the license agreement
- System information: View information about the current version of your system, as well as system information for your computer and operating system
Bose Companion 5 Software Mac
If the problems persist, contact Bose Customer Support.
What is the purpose of the Bose® home entertainment system update application?
This application allows for a simple, immediate software update directly from Bose to your computer and into your system.
Why might I need to update my software?
Bose® home entertainment systems are engineered to be compatible with new audio and video devices as they come to market. This software update adds new features and remote control codes that your system will likely need to work with these new devices.
Will this update work with all Lifestyle® and VideoWave® systems?
No. The update works with all VideoWave® entertainment systems and the Lifestyle® V35, V25, T20, T10, 135 and 235 systems—or any other Lifestyle® system with a USB port.
Can this update be accomplished on both PCs and Macs?
Yes, with minimum operating system requirements: PC's must run Windows XP or higher. Macs must run OS 10 or higher.
Will this update affect my computer in any way?
Only temporarily. While the application is running, it will create and utilize temporary working files. When the application has finished and closed, it will remove all temporary working files including the application itself.
What if I lose my Bose-supplied USB drive?
You may use any USB drive with a capacity of over 1GB to update your system. Simply follow the directions in the download application.
How long will the update take?
You may use any USB drive with a capacity of over 1GB to update your system. Simply follow the directions in the download application.
Is my Lifestyle® system compatible with 3D video sources for better gaming/movie experiences?
Yes, once you download the software update, your Lifestyle® system will be fully compatible with 3D video sources. Just connect a 3D TV and a 3D-capable Blu-ray Disc™ player, gaming console or other such device to your Lifestyle® system. You're now ready to enjoy 3D movies, broadcasts or games. For more information on the system's 3D capabilities, review our supplemental owner's guide.
Please note: The software update for the Bose® control console will not enable the VideoWave® entertainment systems to render 3D video.